G4FD Engine Long Block

1.6L GDI gasoline engine for Hyundai and Kia

A brand-new replacement long block built to the original G4FD specification and shipped worldwide from Zhengzhou, China.

Inline-4, direct injection
1.6 L
at 6300 rpm
103 kW
at 4850 rpm
167 N·m
Condition
Brand new
Warranty
12 months
Minimum order
1 unit
Lead time
7–30 days

Fits Hyundai Elantra, i30, ix35 and Kia K3, Sportage, 2009–2018

Or email info@nanxipower.com

More Hyundai and Kia engines

All Hyundai engines

Looking for another engine? Send the engine code or your VIN and we will check what we can supply. Browse Kia engines

Engine assembly line at NANXI POWER
Engine assembly at NANXI POWER, Zhengzhou

What is the G4FD engine?

The G4FD is Hyundai-Kia's 1.6-litre Gamma GDI engine: a naturally aspirated inline-four with gasoline direct injection, a timing chain and an aluminium block and head.

NANXI POWER supplies it as a brand-new long block — the core engine you install with your existing intake, fuel and electrical parts.

Compression ratio
11.0:1
Bore × stroke
77.0 × 85.4 mm
Timing drive
Timing chain
Emission standard
Euro V

Technical specifications

Engine

Engine code
G4FD
Engine family
Hyundai-Kia Gamma 1.6
Displacement
1.6 L
Layout
Inline-4, front-wheel drive
Max power
103 kW at 6300 rpm
Max torque
167 N·m at 4850 rpm
Bore × stroke
77.0 × 85.4 mm
Compression ratio
11.0:1

Build and supply

Fuel system
Gasoline direct injection
Aspiration
Naturally aspirated
Timing
Timing chain
Block and head
Aluminium
Cooling
Water-cooled
Emission standard
Euro V
Condition
Brand new
Supply form
Engine long block

Which vehicles use the G4FD?

The G4FD was fitted to these Hyundai and Kia models from 2009 to 2018. Versions differ by market, so we check every order against your VIN before it ships.

  • HyundaiElantra
  • Hyundaii30
  • Hyundaiix35
  • KiaK3
  • KiaSportage

Confirm the fit in three steps

  1. Check the engine codeFind "G4FD" stamped on the cylinder block. G4FC and G4FJ look similar but are different engines.
  2. Send your VINThe 17-digit VIN tells us the model year and market version of your vehicle.
  3. Add a few photosPhotos of the old engine's front, intake side and oil pan help us match mounts and connectors.
Identification guide. The VIN and OE numbers shown are examples, not this engine's codes.

What's included in the long block

Included

  • Cylinder block and cylinder head, assembled
  • Crankshaft, pistons and connecting rods
  • Camshafts and valvetrain
  • Timing chain and timing cover
  • Oil pan

Available on request

  • Intake and exhaust manifolds
  • High-pressure fuel pump and injectors
  • Ignition coils and sensors
  • Alternator, starter and A/C compressor
  • Gasket and installation kit

Need more than a long block? List the parts in your inquiry and we will quote them together.

Tested before it ships

12 month warranty

Every G4FD is fully inspected before shipment and covered by a 12-month warranty written into your order. Before your engine leaves, you can ask for photos of:

  • The G4FD engine code on the block
  • Cylinder head and timing cover
  • Oil pan and gearbox interface
  • Final packing in the wooden case
Engines inspected before shipment
100%
Engineering drawings
288+
Key fit clearances checked
155+
Process standards
637+

Packed for export, shipped worldwide

Each long block is sealed, fixed to a pallet and packed in a non-fumigation wooden case, so it clears customs without extra treatment. NANXI POWER branded or neutral packing is available.

Lead time
7–30 days
Minimum order
1 unit
Freight
Sea, air or land
Trade terms
EXW, FOB, CIF, DDP
Documents
Invoice and packing list

Common questions

Which vehicles use the G4FD engine?

The G4FD 1.6L GDI is used in the Hyundai Elantra, i30 and ix35 and the Kia K3 and Sportage, produced from 2009 to 2018. Send your VIN and we will check the exact version for your vehicle.

What is the difference between G4FD and G4FC?

Both are 1.6L Gamma engines. The G4FD uses gasoline direct injection (GDI) and makes more power, while the G4FC uses multi-point port injection. The fuel-system parts are not interchangeable, so check the engine code stamped on your block.

Can a G4FD replace a G4FC or G4FG?

Not as a direct swap. The G4FC and G4FG use port injection, while the G4FD uses direct injection with a high-pressure fuel pump and different engine management. Order the engine code stamped on your original block.

What should I check before the first start?

Check oil, coolant, fuel connections and sensor plugs before the first start. Our guide to G4FD installation precautions walks through six checks step by step. G4FD installation precautions

Is this G4FD a complete engine or a long block?

It is a long block: the assembled cylinder block and cylinder head with the crankshaft, pistons, camshafts and timing chain. Intake, fuel-system and electrical parts can be added to your quotation.

What warranty comes with the G4FD long block?

12 months. Coverage and conditions are written into your order.

Do I need to replace the timing chain when installing?

No. The long block is supplied with its timing chain and timing cover already fitted. Fit new gaskets and check the cooling and fuel connections when you install it.

Can I order one engine, and how long does delivery take?

Yes, the minimum order is one unit. Orders usually ship within 7 to 30 days depending on quantity.

Which trade terms do you offer?

EXW, FOB, CIF and DDP. Tell us your destination port or address and we will quote the terms that suit your order.

About NANXI POWER

Zhengzhou Nanxi Engine Co., Ltd. has been in the engine business since 1998, supplying brand-new and remanufactured engines and long blocks to buyers in Russia, Central Asia, Africa, the Middle East, Europe and the Americas.

In the engine business since
1998
Engines supplied each year
50,000+

Get a G4FD quote

Tell us the quantity and destination. Add your VIN if you would like us to confirm the fit.