G4HC Engine Long Block

1.0 L gasoline engine for Hyundai and Kia

A brand-new replacement long block, shipped worldwide by NANXI POWER from Zhengzhou, China.

Inline-four, multi-point injection
1.0 L
at 5500 rpm
43 kW
at 3100 rpm
82 N·m
Condition
Brand new
Warranty
12 months
Minimum order
1 unit
Lead time
7–30 days

Fits Hyundai Atos, Hyundai Atos Prime, Hyundai Santro and Kia Visto, 1997–2003

Or email info@nanxipower.com

More Hyundai and Kia engines

All Hyundai engines

Looking for another engine? Send the engine code or your VIN and we will check what we can supply. Browse Kia engines

Engine assembly line at NANXI POWER
Engine assembly at NANXI POWER, Zhengzhou

What is the G4HC engine?

The G4HC is a 1.0 L gasoline engine used by Hyundai and Kia: a naturally aspirated inline-four with multi-point injection, a timing belt and a cast iron block.

NANXI POWER supplies it as a brand-new long block — the core engine you install with your existing intake, fuel and electrical parts.

Compression ratio
9.7:1
Bore × stroke
66 × 73 mm
Timing drive
Timing belt
Emission standard
Euro 2

Technical specifications

Engine

Engine code
G4HC
Brand
Hyundai and Kia
Displacement
1.0 L
Layout
Inline Engine
Drive
Front-wheel Drive
Max power
43 kW at 5500 rpm
Max torque
82 N·m at 3100 rpm
Bore × stroke
66 × 73 mm
Compression ratio
9.7:1

Build and supply

Fuel
Gasoline
Fuel system
Multi-Point Injection
Aspiration
Naturally Aspirated
Timing
Timing Belt System
Cylinder block
Cast Iron Cylinder Block
Cylinder head
Aluminum Cylinder Head
Cooling
Water-Cooled
Emission standard
Euro 2
Production years
1997–2003
Condition
Brand new
Supply form
Engine long block
Packing
Non-fumigation wooden box

Reference OE numbers

Long block
21101-02500
Long block
21101-02501
Long block
AUTOPARTS-24

Which vehicles use the G4HC?

The G4HC was fitted to these vehicles (1997–2003). Versions differ by market, so we check every order against your VIN before it ships.

  • HyundaiAtos
  • HyundaiAtos Prime
  • HyundaiSantro
  • KiaVisto

Confirm the fit in three steps

  1. Check the engine codeFind "G4HC" stamped on the cylinder block or shown on the engine label.
  2. Send your VINThe 17-digit VIN tells us the model year and market version of your vehicle.
  3. Add a few photosPhotos of the old engine's front, intake side and oil pan help us match mounts and connectors.
Identification guide. The VIN and OE numbers shown are examples, not this engine's codes.

What's included in the long block

Included

  • Cylinder block
  • Crankshaft
  • Pistons
  • Connecting rods
  • Cylinder head
  • Valve train
  • Timing system
  • Valve cover
  • Oil pan

Available on request

  • Intake and exhaust manifolds
  • Fuel injectors and fuel rail
  • Ignition coils and sensors
  • Alternator, starter and A/C compressor
  • Gasket and installation kit

Need more than a long block? List the parts in your inquiry and we will quote them together.

Tested before it ships

12 month warranty

Every G4HC is fully inspected before shipment and covered by a 12-month warranty written into your order. Before your engine leaves, you can ask for photos of:

  • The G4HC engine code on the block
  • Cylinder head and timing cover
  • Oil pan and gearbox interface
  • Final packing in the wooden case
Engines inspected before shipment
100%
Engineering drawings
288+
Key fit clearances checked
155+
Process standards
637+

Packed for export, shipped worldwide

Each long block is sealed, fixed to a pallet and packed in a non-fumigation wooden case, so it clears customs without extra treatment. NANXI POWER branded or neutral packing is available.

Lead time
7–30 days
Minimum order
1 unit
Freight
Sea, air or land
Trade terms
EXW, FOB, CIF, DDP
Documents
Invoice and packing list

Common questions

Which vehicles use the G4HC engine?

The G4HC is used in the Hyundai Atos, Hyundai Atos Prime, Hyundai Santro and Kia Visto, produced 1997 to 2003. Versions differ by market, so send your VIN and we will check the exact version for your vehicle.

What are the main specifications of the G4HC?

1.0 L gasoline, inline-four, 43 kW at 5500 rpm, 82 N·m at 3100 rpm, timing belt, multi-point injection.

Which OE numbers can I compare with the G4HC?

Reference numbers for comparison: 21101-02500, 21101-02501, AUTOPARTS-24. They help you check the part, but we confirm the final match against your VIN, engine label and photos before the order.

Is the G4HC long block brand new or remanufactured?

It is supplied brand new. Every engine is inspected before shipment, and you can ask for photos before it leaves.

Is this G4HC a complete engine or a long block?

It is a long block: the assembled cylinder block and cylinder head with the crankshaft, pistons, connecting rods, valve train and timing system. Intake, fuel-system and electrical parts can be added to your quotation.

What warranty comes with the G4HC long block?

12 months. Coverage and conditions are written into your order.

Is the timing belt included?

The timing system is part of the standard long block. Confirm the belt, tensioner and water pump on your quotation, and check the timing marks and belt tension when you install it.

Can I order one engine, and how long does delivery take?

Yes, the minimum order is one unit. Orders usually ship within 7 to 30 days depending on quantity.

Which trade terms do you offer?

EXW, FOB, CIF and DDP. Tell us your destination port or address and we will quote the terms that suit your order.

About NANXI POWER

Zhengzhou Nanxi Engine Co., Ltd. has been in the engine business since 1998, supplying brand-new and remanufactured engines and long blocks to buyers in Russia, Central Asia, Africa, the Middle East, Europe and the Americas.

In the engine business since
1998
Engines supplied each year
50,000+

Get a quote for the G4HC

Tell us the quantity and destination. Add your VIN if you would like us to confirm the fit.