GW2.8TC-2 Engine Long Block

2.8T diesel engine for Haval, GWM and Tank

A brand-new replacement long block, shipped worldwide by NANXI POWER from Zhengzhou, China.

Inline engine, common rail direct injection
2.8T
at 3600 rpm
70 kW
at 1600–2600 rpm
225 N·m
Condition
Brand new
Warranty
6 months
Minimum order
1 unit
Lead time
7–30 days

Fits Great Wall Wingle3, Wingle5, Deer, Sailin and Haval H3, 2007–2017

Or email info@nanxipower.com

More Haval, GWM and Tank engines

All Great Wall engines

Looking for another engine? Send the engine code or your VIN and we will check what we can supply. Browse all engines

Engine assembly line at NANXI POWER
Engine assembly at NANXI POWER, Zhengzhou

What is the GW2.8TC-2 engine?

The GW2.8TC-2 is a 2.8T diesel engine used by Haval, GWM and Tank: a turbocharged inline engine with common rail direct injection, a timing belt and a cast iron block.

NANXI POWER supplies it as a brand-new long block — the core engine you install with your existing intake, fuel and electrical parts.

Compression ratio
16.7
Bore × stroke
83.1 × 92 mm
Timing drive
Timing belt
Emission standard
Euro IV

Technical specifications

Engine

Engine code
GW2.8TC-2
Brand
Haval, GWM and Tank
Displacement
2.8T
Layout
Inline Engine
Drive
Front-engine Four-wheel Drive, Rear-wheel Drive
Max power
70 kW at 3600 rpm
Max torque
225 N·m at 1600–2600 rpm
Bore × stroke
83.1 × 92 mm
Compression ratio
16.7

Build and supply

Fuel
Diesel
Fuel system
Common Rail Direct Injection
Aspiration
Turbocharged
Timing
Timing Belt System
Cylinder block
Cast Iron Cylinder Block
Cylinder head
Aluminum Cylinder Head
Cooling
Water-Cooled
Emission standard
Euro IV
Production years
2007–2017
Condition
Brand new
Supply form
Engine long block
Packing
Non-fumigation wooden box

Which vehicles use the GW2.8TC-2?

The GW2.8TC-2 was fitted to these vehicles (2007–2017). Versions differ by market, so we check every order against your VIN before it ships.

  • Great WallWingle3
  • Great WallWingle5
  • Great WallDeer
  • Great WallSailin
  • HavalH3

Confirm the fit in three steps

  1. Check the engine codeFind "GW2.8TC-2" stamped on the cylinder block or shown on the engine label.
  2. Send your VINThe 17-digit VIN tells us the model year and market version of your vehicle.
  3. Add a few photosPhotos of the old engine's front, intake side and oil pan help us match mounts and connectors.
Identification guide. The VIN and OE numbers shown are examples, not this engine's codes.

What's included in the long block

Included

  • Cylinder block
  • Crankshaft
  • Pistons
  • Connecting rods
  • Cylinder head
  • Valve train
  • Timing system
  • Valve cover
  • Oil pan

Available on request

  • Intake and exhaust manifolds
  • Fuel injection pump and injectors
  • Turbocharger and intercooler pipes
  • Glow plugs and sensors
  • Alternator, starter and A/C compressor
  • Gasket and installation kit

Need more than a long block? List the parts in your inquiry and we will quote them together.

Tested before it ships

6 month warranty

Every GW2.8TC-2 is fully inspected before shipment and covered by a 6-month warranty written into your order. Before your engine leaves, you can ask for photos of:

  • The GW2.8TC-2 engine code on the block
  • Cylinder head and timing cover
  • Oil pan and gearbox interface
  • Final packing in the wooden case
Engines inspected before shipment
100%
Engineering drawings
288+
Key fit clearances checked
155+
Process standards
637+

Packed for export, shipped worldwide

Each long block is sealed, fixed to a pallet and packed in a non-fumigation wooden case, so it clears customs without extra treatment. NANXI POWER branded or neutral packing is available.

Lead time
7–30 days
Minimum order
1 unit
Freight
Sea, air or land
Trade terms
EXW, FOB, CIF, DDP
Documents
Invoice and packing list

Common questions

Which vehicles use the GW2.8TC-2 engine?

The GW2.8TC-2 is used in the Great Wall Wingle3, Wingle5, Deer, Sailin and Haval H3, produced 2007 to 2017. Versions differ by market, so send your VIN and we will check the exact version for your vehicle.

What are the main specifications of the GW2.8TC-2?

2.8T diesel, inline engine, 70 kW at 3600 rpm, 225 N·m at 1600–2600 rpm, timing belt, common rail direct injection.

Is the GW2.8TC-2 long block brand new or remanufactured?

It is supplied brand new. Every engine is inspected before shipment, and you can ask for photos before it leaves.

Is this GW2.8TC-2 a complete engine or a long block?

It is a long block: the assembled cylinder block and cylinder head with the crankshaft, pistons, connecting rods, valve train and timing system. Intake, fuel-system and electrical parts can be added to your quotation.

What warranty comes with the GW2.8TC-2 long block?

6 months. Coverage and conditions are written into your order.

Is the timing belt included?

The timing system is part of the standard long block. Confirm the belt, tensioner and water pump on your quotation, and check the timing marks and belt tension when you install it.

Can I order one engine, and how long does delivery take?

Yes, the minimum order is one unit. Orders usually ship within 7 to 30 days depending on quantity.

Which trade terms do you offer?

EXW, FOB, CIF and DDP. Tell us your destination port or address and we will quote the terms that suit your order.

About NANXI POWER

Zhengzhou Nanxi Engine Co., Ltd. has been in the engine business since 1998, supplying brand-new and remanufactured engines and long blocks to buyers in Russia, Central Asia, Africa, the Middle East, Europe and the Americas.

In the engine business since
1998
Engines supplied each year
50,000+

Get a quote for the GW2.8TC-2

Tell us the quantity and destination. Add your VIN if you would like us to confirm the fit.