KA24 2WD Engine Long Block
2.4 L gasoline engine for Nissan and Infiniti
A brand-new replacement long block, shipped worldwide by NANXI POWER from Zhengzhou, China.
- Inline engine, multi-point injection
- 2.4 L
- at 4800 rpm
- 110 kW
- at 3600 rpm
- 208 N·m
- Condition
- Brand new
- Warranty
- 12 months
- Minimum order
- 1 unit
- Lead time
- 7–30 days
Fits 240SX, Nissan Altima, Nissan Hardbody Pickup, Nissan Frontier, Nissan Xterra and Zhengzhou Nissan Rich Pickup, 1988–2016
Or email info@nanxipower.com
More Nissan and Infiniti engines
All Nissan engines
KA24 4WD 2.4L long blockMOQ: 1 unit
KA24E 2.4L long blockMOQ: 1 unit
MR20DE 2.0L long blockMOQ: 1 unit
MRA8 1.8L long blockMOQ: 1 unit
QR20DE 2.0L long blockMOQ: 1 unit
QR25 T30 6N2 2.5L long blockMOQ: 1 unit
QR25T31 2.5L long blockMOQ: 1 unit
TD27 2.7L long blockMOQ: 1 unit
VK56 5.6L long blockMOQ: 1 unit
VQ25DE 2.5L long blockMOQ: 1 unitLooking for another engine? Send the engine code or your VIN and we will check what we can supply. Browse all engines
What is the KA24 2WD engine?
The KA24 2WD is a 2.4 L gasoline engine used by Nissan and Infiniti: a naturally aspirated inline engine with multi-point injection, a timing chain and a cast iron block.
NANXI POWER supplies it as a brand-new long block — the core engine you install with your existing intake, fuel and electrical parts.
- Compression ratio
- 9.5:1
- Bore × stroke
- 89 × 96 mm
- Timing drive
- Timing chain
- Emission standard
- Euro IV
Technical specifications
Engine
- Engine code
- KA24 2WD
- Brand
- Nissan and Infiniti
- Displacement
- 2.4 L
- Layout
- Inline Engine
- Drive
- Rear-wheel Drive
- Max power
- 110 kW at 4800 rpm
- Max torque
- 208 N·m at 3600 rpm
- Bore × stroke
- 89 × 96 mm
- Compression ratio
- 9.5:1
Build and supply
- Fuel
- Gasoline
- Fuel system
- Multi-Point Injection
- Aspiration
- Naturally Aspirated
- Timing
- Timing Chain System
- Cylinder block
- Cast Iron Cylinder Block
- Cylinder head
- Aluminum Cylinder Head
- Cooling
- Water-Cooled
- Emission standard
- Euro IV
- Production years
- 1988–2016
- Condition
- Brand new
- Supply form
- Engine long block
- Packing
- Non-fumigation wooden box
Which vehicles use the KA24 2WD?
The KA24 2WD was fitted to these vehicles (1988–2016). Versions differ by market, so we check every order against your VIN before it ships.
- 240SX
- NissanAltima
- NissanHardbody Pickup
- NissanFrontier
- NissanXterra
- NissanZhengzhou Nissan Rich Pickup
Confirm the fit in three steps
- Check the engine codeFind "KA24 2WD" stamped on the cylinder block or shown on the engine label.
- Send your VINThe 17-digit VIN tells us the model year and market version of your vehicle.
- Add a few photosPhotos of the old engine's front, intake side and oil pan help us match mounts and connectors.
What's included in the long block
Included
- Cylinder block
- Crankshaft
- Pistons
- Connecting rods
- Cylinder head
- Valve train
- Timing system
- Valve cover
- Oil pan
Available on request
- Intake and exhaust manifolds
- Fuel injectors and fuel rail
- Ignition coils and sensors
- Alternator, starter and A/C compressor
- Gasket and installation kit
Need more than a long block? List the parts in your inquiry and we will quote them together.
Tested before it ships
12 month warranty
Every KA24 2WD is fully inspected before shipment and covered by a 12-month warranty written into your order. Before your engine leaves, you can ask for photos of:
- The KA24 2WD engine code on the block
- Cylinder head and timing cover
- Oil pan and gearbox interface
- Final packing in the wooden case
- Engines inspected before shipment
- 100%
- Engineering drawings
- 288+
- Key fit clearances checked
- 155+
- Process standards
- 637+
Packed for export, shipped worldwide
Each long block is sealed, fixed to a pallet and packed in a non-fumigation wooden case, so it clears customs without extra treatment. NANXI POWER branded or neutral packing is available.
- Lead time
- 7–30 days
- Minimum order
- 1 unit
- Freight
- Sea, air or land
- Trade terms
- EXW, FOB, CIF, DDP
- Documents
- Invoice and packing list
Common questions
Which vehicles use the KA24 2WD engine?
The KA24 2WD is used in the 240SX, Nissan Altima, Nissan Hardbody Pickup, Nissan Frontier, Nissan Xterra and Zhengzhou Nissan Rich Pickup, produced 1988 to 2016. Versions differ by market, so send your VIN and we will check the exact version for your vehicle.
What are the main specifications of the KA24 2WD?
2.4 L gasoline, inline engine, 110 kW at 4800 rpm, 208 N·m at 3600 rpm, timing chain, multi-point injection.
Is the KA24 2WD long block brand new or remanufactured?
It is supplied brand new. Every engine is inspected before shipment, and you can ask for photos before it leaves.
Is this KA24 2WD a complete engine or a long block?
It is a long block: the assembled cylinder block and cylinder head with the crankshaft, pistons, connecting rods, valve train and timing system. Intake, fuel-system and electrical parts can be added to your quotation.
What warranty comes with the KA24 2WD long block?
12 months. Coverage and conditions are written into your order.
Do I need to replace the timing chain when installing?
No. The long block is supplied with its timing chain already fitted. Fit new gaskets and check the cooling and fuel connections when you install it.
Can I order one engine, and how long does delivery take?
Yes, the minimum order is one unit. Orders usually ship within 7 to 30 days depending on quantity.
Which trade terms do you offer?
EXW, FOB, CIF and DDP. Tell us your destination port or address and we will quote the terms that suit your order.
About NANXI POWER
Zhengzhou Nanxi Engine Co., Ltd. has been in the engine business since 1998, supplying brand-new and remanufactured engines and long blocks to buyers in Russia, Central Asia, Africa, the Middle East, Europe and the Americas.
- In the engine business since
- 1998
- Engines supplied each year
- 50,000+
Get a quote for the KA24 2WD
Tell us the quantity and destination. Add your VIN if you would like us to confirm the fit.
Related engines
YD25 2.5L long blockMOQ: 1 unit
HR15DE 1.5L long blockMOQ: 1 unit
HR16(EIGHT-NOZZLE) 1.6L long blockMOQ: 1 unit
HR16(FOUR-NOZZLE) 1.6L long blockMOQ: 1 unit
HRA2DDT 1.2L long blockMOQ: 1 unit
15FCD 1.5L long blockMOQ: 1 unit
15S4G ROEWE 350 1.5T long blockMOQ: 1 unit
15S4U ROEWE 350 1.5L long blockMOQ: 1 unit
18K4C 1.8L long blockMOQ: 1 unit
18K4G 1.8T long blockMOQ: 1 unit